Used Sollich Servo Cutting Machine and Slab Former

Sollich Slab Former and Servo Cutting Machines with:

• SGU-S servo cutter has the following specifications:
• Unit is a cross cutter where a mechanically driven knife cuts all fat and sugar compounds are cut to length in a smooth manner.
• Cut is carried out at a sub knife, which is mechanically coupled to the upper knife
• Cutting knife is driven mechanically via a servomotor with eccentric motion.  The knife stroke is 50 mm (fixed value and cannot be modified)
• Movement of knife is caused be a servomotor with adjustable eccentric
• Cutting knife is cleaned at both sides be a scraper
• Hold-down strips can be arranged below the scraper holders, which hold the material to be cut as soon as the knife moves upwards.
• Unit contains remote control panel with operator interface panel
• WET 1050 Slab Former has the following specifications:
• Slab former WET is used for the production of an evenly formed, precooled second layer of caramel, toffee, fudge, or jelly with a thickness of up to 5 mm.
• The mass may be cooled down on a cooling drum from 90 degree C to approx 45 degree C
• As part of a Conbar-line, the machine serves foremost in the production of 2 or more layered candy bars.
• The mass is channeled directly from the cooker to the receiving hopper and is spread over the entire width of the forming drum.
• The filling height in the hopper, which reaches the lowr edge of the discharge gage, must be maintained at a constant level either by dosed feeding or by a capacitive level probe.
• The cooling roll draws thin and even stripes out of the hopper, wherby the layer thickness depends on the roller temperature and on the opening of the streak weir.
• The opening of the streak weirs can be calibrated by means of a carefully measurable adjusting device.
• Pneumatic gates open and close these streak weirs.
• The heatable scraper lifts the stripes from the cooling roller and guides them onto a mass conveyor running at the same conveyor speed below.  Products will be coated selectively with these mass stripes.