Used Rovema Vertical Bagger VFFS Model VPK 260

Used Rovema Vertical Bagger with:

• Model VPK-260T continuous motion bagger
• Various Forming Sets, including "Stabilopack" tooling
• "Stabilopack" tooling is used to make a stand-up vertical pouch
• Optional Markem "Smart Date 5" thermal transfer bag printer is available for an additional cost.  Ask sales person for separate quote.
• The film feeding device pulls film from the film carriage and pushes
  it down the forming tube and past the sealing devices. It includes
  two belt assemblies, a drive system, an engage/retract device, and
  touchscreen controls
• The belt assemblies grip the film and push it down the forming tube.
  They are equipped with vacuum assist. The vacuum pulls the film
  to the belts and makes it easier for the feeding device to move the
  film.
• Each belt assembly is turned by a servo-motor. Each servo-motor
  is powered by a servo-drive (located inside of the electrical
  enclosure). A motion controller (also located inside of the electrical
  enclosure) sets the film feeding speed based on the values set for
  the bag length and the machine speed parameters; these
  parameters are located on the Main submenu screen
• The drive system turns the sealing band in synch with the film
  feeding belts. This keeps the band stationary with respect to the
  film and prevents the band from wrinkling the film. The system
  includes an AC drive motor, a speed controller, and a gear box.
  The speed controller receives a signal from the motion controller to
  synchronize the movement of the sealing band to the movement of
  the film feeding belts.
• The horizontal sealing device creates the top and bottom seals in a
  bag and cuts the bag from the film tube. Top and bottom seals
  (horizontal seals) are created in the same manner as the vertical
  seal by applying heat and pressure for a certain amount of time.
• The drive system shapes the motion of the sealing jaws (“DMotion”).
  It is this motion that causes the sealing jaws to open and
  close around a bag. The system includes a servo motor, a servo
  amplifier, gearing, and crank arms. The servo motor turns the
  gearing which turns the crank arms. The rotating crank arms
  cause the jaws to open and close.
• Power film unwinder
• System has gusset option to improve the appearance of the final package
• Film tracking assembly moves the film carriage (and the film
  web) towards the left or right-hand side of the forming collar. By
  changing the film carriage position relative to that of the forming
  collar, you change the alignment of the film edges.
• Out of film sensor and indicator
• Foam air deflators