Sigma is looking for a Checkweigher for washdown application

Need checkweigher with the following specs:

• Washdown capable
• Product is poly bag with loose product
• Need three belt system
• 17" minimum belt width
• Must be accurate to 1 oz
• Must be production ready

Sigma is looking for a 140 feet of table top conveyor

Table top conveyor with:

• 6" minimum width, can be up to 18" wide
• Can be table top or mattop chain
• Customer needs up to 140' total length
• Can use multiply drives
• We need at least one 90 degree curve
• Immediate need

Sigma is looking for a Arpac inline bundler

Require Arpac inline bundler capable of:

• 15 cases per minute
• 14 inch wide x 12 inch long x 9 inch high tray
• Can use any inline tray wrap version

Sigma is looking for a Shanklin A26 Lbar Sealer

Need operational Shanklin A26 L bar sealer

Sigma is looking for a Induction sealer for 63 mm cap

Immediate need for induction sealer for

• 63mm plastic cap
• Water or Air cooled is acceptable. 
• Customer needs table top conveyor if available

Sigma is looking for a Adco Horizontal Automatic Cartoner

Need a Adco horizontal barrel cam load cartoner with the following:

• Prefer Model 15DBC
• Unit must be set-up for glue closure
• Adjustable infeed buckets
• Minimum 12" center
• Rotory carton pick
• Must be capable of 80 cartons per minute
• Set up for hot melt glue
• Late model unit 1998 or later

Sigma is looking for a Single Sigma Mixer 1000 Pound Capacity

We are looking to purchase two (2) single sigma horizontal mixers, all stainless steel preferred but will consider stainless steel contact only, 1000 pound capacity, 75 HP minimum motor,

Sigma is looking for a Texwrap Shrink Wrapper for 18" wide product

Need a Texwrap (or similiar brand) Shrink wrapper capable of running 18" wide product x 2" high.  Rate is about 40 units per minute.  Side seal is preferred but overlap is acceptable.

Sigma is looking for a Yamato 16 Head Washdown Combination Head Scale

We are in need of the following Combination Weigher

• Yamato brand
• Washdown preferred
• Late model
• 16 head minimum

Sigma is looking for a Great Lakes T-37 Shrink Wrapper

In need of a Great Lakes T-37 side seal shrink wrapper.  Must be in operating condition and ready for production.

Sigma is looking for a 10 to 14 Head Combination Weigh Scale

We need two combination weigh scales for a customer integrated project.  Unit can be a 10, 12 or 14 head system.  Minimum fill of 1 oz.  Maximum fill of 6 oz.  Contact parts must be stainless steel.  Painted frame is acceptable.  Unit must be in operating condition for immediate installation.  Would prefer unit with support and mezzanine.  Please include location so we can arrange inspection visit.

Sigma is looking for a Top and Bottom Enrober

Top and Bottom Enrober with the following options:

• 48" wide belt
• Removal hoppers on top and bottom
• Will be running chocolate
• Prefer Fedco unit

Sigma is looking for a BEL 150 Case Sealer Taper

Customer looking for a BEL 150 Case Taper with:

• 2" tape heads
• Operational and ready for production
• Need is immediate

Sigma is looking for a Jones Criterion Cartoner

We are in need of a Jones Criterion Cartoner with the following specifications:

• Product centers of 12"
• Product depth of 12"
• Overhead confinement preferred but not required
• Rotary carton pick
• Overhead carton squaring in closing section

Please inlcude year, condition, and asking price

Sigma is looking for a Holmatic PR-2 Cup Filler and Sealer

Immediate need for a Holmatic PR-2 Cup Filler and Sealer with pick and place capper.  2 up system with 4" diameter cups.

Sigma is looking for a Markem SmartLase 130i IP65 Laser

Sourcing a Markem SmartLase model 130S or model 130i IP65 Laser coder.  Customer is brand specific.  Unit is a 30 watt CO2 laser

Sigma is looking for a Top load case packer for flexible packaging

Project requirement for a top load robotic case packer.  Rate is up to 300 packages per minute.  Product ranges from 3 to 6 inches in length x 1 to 2 inches wide x 1/4" high.

Sigma is looking for a Heat exchanger for product pasteurizing

Details to follow

Sigma is looking for a Corrugated case side gripper for case coding

Immediate need for a functioning case side gripping device for coding the bottom of a corrugated shipping case.

Sigma is looking for a 1000 Gallon Sanitary Tank with Paddle Mixer

We require a 1000 Gallon Sanitary Tank with Paddle Mixer with:

• 316 Stainless Steel pharma grade
• 1000-1200 gallon range
• Needs to be within 6'-0" high x 6'-0" diameter
• Paddle mixer included
• Cone or dish bottom
• Flanged fittings for inlet and outlets preferred
• Closed top with manway for loading dry ingredients
• CIP spray ball head